Unicom-electric GST-2402 Manual do Utilizador

908 Canada CourtCity of Industry, CA 91748 U.S.A.Phone: 626.964.7873 or 800.346.6668 Fax: 626.964.7880www.unicomlink.com e-mail: [email protected]

LED Indicators The LED Indicators give real-time information of systematic operation status.The following table provides a descriptio

as shown in Figure 2-3. The Switch will work with AC in the range 100-240VAC, 50-60Hz.Figure 2-3. The Rear Panel of SmartGST-2402Desktop Installation

Rack-mounted Installation The SmartGST-2402 comes with a rack-mounting kit and can be mounted inany EIA standard size, 19" R

Figure 2-5. Mounting the Switch in an EIA standard 19" RackNote: For proper ventilation, allow about at least 4" (10 cm) of clearance onthe

3. Network ApplicationThis section provides a few samples of network topology in which the Switchis used. The SmartGST-2402 is designed as a segment s

Figure 3-1. Small Workgroup ApplicationSegment Bridge This switch is an ideal solution for departmental users in corporate backbones

Print ServerServerUplink to backbone switch10/100Mbps portGiga portFigure 3-2. Department Bridge ApplicationConnecting to the Switch

4. Console ManagementLogin in the Console Interface When the connection between Switch and PC is ready, turn on the PC andrun a t

Console main screenMain MenuThere are 8 selections as follow. [1] Port Status: it displays status of the ports [2] Port Configuration: configure t

Main menu line interfaceControl Key description:The control keys provided in all menus: I/M/J/L: Move the vernier to up, down, left, and right. En

1. INTRODUCTION ...1Features...

Port StatusIt displays the status of the ports. Enter the “1” to enter the Port Statusdisplay interface. In the Port Status interface, us

Port configuration interface Enable: enabling or disabling this port. Speed advertisement: select speed and duplex mode of port. Flow Control: e

trunk status to “Enable”.Trunk Configuration interfaceTrunk StatusThis window displays the trunk link warning information. When the trunkinggroup has

QoSYou can configure QoS functions. TOS/Diff Serv. Priority: enabling or disabling TOS/Diff service priority. 802.1p Priority: enabling or disabli

Priority Tag Insert/RemoveSets each port's tagging control. There are four choices of port taggingcontrol: Disable: No port tagging control on

name is "Switch-A". Broadcast Storm Filtering Control: enter “3” to change the value. Load Factory Default Setting: enter “1” to set the

Add VLAN Group interfaceDelete VLAN Group1. Press “E” to Edit mode.2. Press “D” and enter the VLAN Entry No.3. Press “ Enter”. The system will ask

SaveSave all configurations changes. Without saving the configuration, the newsetting will not take effect. If you turn off the device

5. TroubleshootingThis section is intended to help you solve the most common problems of theSmartGST-2402.Incorrect connections

between end nodes. In addition, you should make sure that your networktopology contains no data path loops. Between any two ends nodes, t

APPENDIX ...29Console Port Pin Assignmen

6. Technical SpecificationThis section provides the specifications of SmartGST-2402, and the followingtable lists these specifications.StandardIEEE802

Power 100~240VAC 50/60HzPower Consumption 20Watts(Maximum)Dimensions 440mm x 161mm x 44mm (L x W x H)EMI & Safety FCC Class A, CE, UL, cUL, CE/EN6

AppendixConsole Port Pin AssignmentsThe DB-9 serial port on the front panel is used for out-of-band consoleconfiguration. The menu-drive

 Console Port to 9-Pin DTE Port on PC9-PinSerial PortCCITT SignalPC’s 9-PinDTE Port2 RXD <---------RXD ------------ 3 TxD3 TXD -----------TXD ---

data while pins 3 and 6 are used for receiving data. RJ-45 Pin AssignmentsPin Number Assignment1 Tx+2 Tx-3 Rx+6 Rx-Note: “+” and “-” signs represent

1. IntroductionWelcome to the World of Network Switching. In modern business,communication and information sharing are fundamental to

connections over long distances.Features  IEEE802.3 10Base-T, IEEE802.3u 100Base-TX/FX, IEEE802.3ab1000Base-T, IEEE802.3z Gigabit

Software Features Management In-Band Local Console (RS-232)Port configurationLink speed, link mode, Port disable/Enable, PortFlow

Package Contents Unpack the contents of the SmartGST-2402 and verify them against thechecklist below. SmartGST-2402 Fast Ethernet

This revolutionized networking. First, by allowing two-way, simultaneoustransmissions over the same port (Full-duplex), which essentially doubl

2. Hardware DescriptionThis Section describes the hardware of the SmartGST-2402 and gives aphysical and functional overview of this switch.The physica